Stable and reliable vacuum is essential to the consistent operation of the milking system and to maximize animal health and milk production, especially in new, high airflow milking systems. The Stabilvac Vacuum Regulator from Interpuls was designed to control the vacuum system with extreme accuracy and reliability.

Depending on the model, the Monobloc Stabilvac Regulator will maintain consistent vacuum between 34 kPa (10” Hg) and 60 kPa (18” Hg) at airflow up to 6,300 l/min (223 cmf). Operating on the servo principle (where a separate sensor, the servo pilot valve, senses the line vacuum, compares it to a pre-set value, then signals the main control valve to adjust airflow to maintain the pre-set value), this system is very accurate, conserves vacuum, and is very quiet. The design allows for quick installation, and the unit can be cleaned and serviced in less than 10 minutes.

This regulator is recommended for vacuum pumps from 35 to 70 cfm (1,000 to 2,000 liters/min) and will maintain vacuum from 11” to 15” Hg (36 to 50 kPa). Replacement filters available. Wt. 3 lb.